Real-world State of Health (SoH) for the BMW i5, based on 7 aggregated data points across 2024–2024 model years. On average the i5 loses about 1.7% per year — here's what that means for range, resale, and when (if ever) you'd need a replacement.
State of Health vs. mileage, from real i5 data. The curve flattens after the initial break-in drop — the steepest losses happen early, then degradation slows.
| Mileage | Typical SoH | Status | Est. range |
|---|---|---|---|
| 50,000 km | 95.5% | Excellent | 399 km |
| 100,000 km | 93% | Excellent | 388 km |
| 150,000 km | 91.5% | Excellent | 382 km |
Estimates from aggregated real-world data. Individual results vary with climate, charging habits, and use.
Get a free, instant State of Health estimate for your exact year and mileage — no account, no hardware.
Check My i5 — FreeVoltChek's estimate is data-driven, but the only way to read your i5's true State of Health is straight from its Battery Management System with an OBD2 scanner.
Affiliate link — we earn a small commission at no cost to you
Gentle Level 2 home charging generates far less heat than DC fast charging — the single biggest driver of degradation. See our best home EV chargers for 2026 to slow wear and save on every charge.
Based on aggregated real-world data, the BMW i5 loses roughly 1.7% of its capacity per year. At 100,000 km it typically retains about 93% State of Health, and it is covered by a 8-year / 160,000 km battery warranty down to 70% capacity. Most i5 batteries are expected to outlast the rest of the car.
A full BMW i5 pack is around 81.2 kWh. At current installed prices of roughly $120–$180 per kWh, an out-of-warranty replacement would land in the $9,700–$14,600 range — but module-level repair is often far cheaper, and most owners never need it. See our EV battery replacement cost guide.
A used BMW i5 can be an excellent value as long as the battery is healthy. Always check the State of Health before buying — at 91.5% (typical at higher mileage) the car still delivers strong daily range. Run a free VoltChek estimate and confirm with an OBD2 scanner before you commit.
Two ways: get an instant data-driven estimate from VoltChek using your year and mileage (free, no hardware), or read the exact value from the car's Battery Management System with an OBD2 scanner. We recommend starting with the free estimate, then verifying with a scanner.